2016年思科認證CNAA考試模擬試題及答案
1: your junior network administrator wants to know what the default subnet mask is for a class c ip address. what do you tell him?
a. ]6l
b.
c.
d.
e.
2: an application needs to have reliable, end-to-end connect-ivity. which of the following protocols will give you reliable connectivity?
a. tcp
b. udp
c. ip
d. icmp
3: you are designing a network, which needs to support 55 users. you don't plan to extend the segment beyond the current number of users. which subnet mask would best meet your needs?
a.
b.
c.
d.
4: you have added a new switch to your network. you want to manage it remotely, so you need to assign it an ip address. your router that connects to the switch has an ip address of which of the following addresses can you assign to this switch?
a.
b.
c.
d.
e.
f.
g.
5: the address is a host address in which of the following subnets?
a. –
b. –
c. –
d. –
6: you are designing an ip address scheme for your brand new remote office. the vice president of it calls to tell you that you will be in charge of the subnetwork. this supplies you with a single subnetwork with 62 hosts. you need to have at least two subnets with 14 hosts in each subnet. what custom subnet mask should you use?
a.
b.
c.
d.
e.
7: you have subnetted the network with a /24 mask. your boss at acme, inc. wants to know how many usable subnetworks and usable host addresses per subnet this would provide. what should you tell her?
a. one network with 254 hosts
b. two networks with 128 hosts
c. four networks with 64 hosts
d. six networks with 30 hosts
8: identify three valid host addresses in any subnet of the network, assuming a fixed subnet mask of . (choose three.)
a.
b.
c.
d.
e.
f.
9: what is the subnetwork address for a host with the ip address ?
a.
b.
c.
d.
e.
f.
10: which of the following protocols uses a three-way handshake mechanism to establish sessions?
a. tcp
b. ip
c. udp
d. ipx
e. frame relay
11: which of the following protocols is connection-oriented
a. tcp
b. ip
c. ipx
d. frame relay
12: you are using an application on your windows 2000 client machines that provides error correction. you need a protocol to provide fast transport. which protocol should your application use?
a. tcp
b. ip
c. udp
d. spx
e. appletalk
13: when using tcp, after a session is open, the applications can adjust the number of segments they receive before sending an acknowledgment. this behavior is known as ______________.
a. mtu adjustment
b. windowing
c. flexible send path
d. fcs
14: if the destination did not receive a segment, how will the tcp host know to resend the information?
a. the ack received will not include the segment number that was not received.
b. the ack received will include the segment number that was not received.
c. the sending host will send a pack to verify segment receipt.
d. the destination host will send a yack message back to the sending host.
15: you are planning on using a single network that supports 208 users. which ip address class would you choose to be the most efficient?
a. class a
b. class b
c. class c
d. class d
e. class e
16: rfc 1918 defines the private ip address ranges. which of the following ip addresses are considered part of these ranges? (choose three.)
a.
b.
c.
d.
e.
17: a new network is being designed for your company, acme, inc. if you use a class c ip network, which subnet mask will provide one usable subnet per department while allowing enough usable host addresses for each department specified in the table?
department
number of users
corporate
7
customer support
15
financial
13
hr
7
engineering
16
a.
b.
c.
d.
e.
18: which of these protocols provides data transport, relying on the error correction capabilities of the application itself?
a. udp
b. tcp
c. snmp
d. icmp
19: which of the following are used by tcp to ensure reliable delivery of data? (choose two.)
a. mac address resolution
b. sequence numbers
c. acknowledgments(GbbFi,tk k&dF={(GbbFi,tk k&dF={t$
d. ping
e. routing updates
20: you discover that you are able to adjust the window size of the tcp segment. you increase the window size to test the results. what will you observe happening on your network?
a. increased throughput
b. decreased throughput
c. increased latency
d. decreased reliability
相關文章
-
2016年思科認證CCIE認證考試模擬試題及答案
思科認證主要考試內容是什麼?今天yjbys小編爲大家分享的是思科認證考試模擬試題及答案,僅供同學們複習參考!1. Before inserting a new switch in the network, the network administrator checks that the VTP domain -
HCNA-Big Data V1.0認證模擬試題及答案
1.(多選)基於Hadoop開源大數據平臺主要提供了針對數據分佈式計算和存儲能力,如下屬於分佈式存儲組件的有?A. MR B. Spark C. HDFS D. HBase2.(單選)FusionInsight HD系統中HDFS 默認 Block Size是多少?A. 32MB B. 64MB -
華爲認證HCNA-Big Data模擬試題及答案
1.(多選)基於Hadoop開源大數據平臺主要提供了針對數據分佈式計算和存儲能力,如下屬於分佈式存儲組件的有?A. MR B. Spark C. HDFS D. HBase2.(單選)FusionInsight HD系統中HDFS 默認 Block Size是多少?A. 32MB B. 64MB -
思科認證CCNA認證試題及答案中文版
思科認證有CCNA、CCDA、CCNP、CCDP、CCSP、CCIP、CCVP、CCIE(又分爲針對路由和交換;語音;存儲網絡;安全;電信運營商)等多種不同級別、不同內容、不同方向的各種認證,比較常用的、社會需求量比較大的是CCNA、CCNP、路由 -
華爲hcna認證模擬試題及答案
1.(題型:單選)G.652光纖在1550nm 窗口的色散係數爲( )A.17 ps/B.6 ps/C.0 ps/D.1 ps/2.(題型:單選)STM-N的複用方式是( )。A. 字節間插B. 比特間插C. 幀間插D. 統計複用3.(題型:單選)下列關於SDH設備邏輯功能塊描述正確 -
華爲認證HCNA-Storage-BSSN模擬試題及答案
1.(單選) 在容災備份中用到的RPO的全稱是:A. Retu Purchase OrderB. Recover Plan ObjectiveC. Restore Point ObjectiveD. Recovery Point Objective2.(單選) 一個業務連續性高的系統中,RPO值和RTO值應該具備的特點是:A -
思科認證CCNA認證試題帶答案中文版
凡具有DOS、Windows和一定英語水平的在職人員、各大專院校在校學生及要求獲得網絡關鍵設備技術知識的人員均可報名參加Cisco培訓。通過國際認證考試可獲得Cisco國際認證證書。下面是小編爲大家蒐集的相關試題,供大家參 -
思科認證CCNA認證試題和答案中文版
想要獲得思科認證,首先要參加由思科推薦並授權的培訓中心(Cisco Training Partner,簡稱CTP)所開設的培訓課程。完成學業後再到由全球考試機構Sylvan Prometric授權的.考試中心參加由思科指定的科目的認證考試。通過指定 -
思科認證CCNA認證試題與答案中文版
思科認證的考試內容包括筆試和實驗。筆試在全球認證的考試中心進行,時間爲兩個小時。實驗考試只限於思科在全世界範圍內指定的6個考點,分別位於美國、澳大利亞、比利時、日本、北京的新世紀飯店以及香港。實驗室考試分 -
2017年CCNA認證試題及答案
廣受讚譽的思科職業認證計劃爲網絡人士,以及他們的經理和聘用他們的機構提供了重要的、可衡量的能力評估手段。下面是小編收集的CCNA認證試題及答案,希望大家認真閱讀!1、目前,我國應用最爲廣泛的LAN標準是基於()的以太