實施Cisco IP路由考試要點
實施Cisco IP 路由(ROUTE 300-101)是獲得思科CCNP和CCDP認證需要通過的一項考試。下面小編準備了該科考試的要點,提供給大家參考!
考試說明:
考試時間爲120分鐘,包括50-60道考題。ROUTE 300-101考試證明通過的考生具備網絡路由的知識和相關技能。他們有能力使用先進的`IP尋址技術和路由技術實施可擴展的、高安全性的思科路由與局域網,廣域網及IPv6的連接。本考試還涵蓋了爲支持企業分支辦公網絡和移動網絡工作環境配置高安全性路由解決方案。
10% 1.0 Network Principles
1.1 Identify Cisco Express Forwarding concepts
1.1.a FIB
1.1.b Adjacency table
1.2 Explain general network challenges
1.2.a Unicast
1.2.b Out-of-order packets
1.2.c Asymmetric routing
1.3 Describe IP operations
1.3.a ICMP Unreachable and Redirects
1.3.b IPv4 and IPv6 fragmentation
1.3.c TTL
1.4 Explain TCP operations
1.4.a IPv4 and IPv6 (P)MTU
1.4.b MSS
1.4.c Latency
1.4.d Windowing
1.4.e Bandwidth-delay product
1.4.f Global synchronization
1.5 Describe UDP operations
1.5.a Starvation
1.5.b Latency
1.6 Recognize proposed changes to the network
1.6.a Changes to routing protocol parameters
1.6.b Migrate parts of the network to IPv6
1.6.c Routing protocol migration
10% 2.0 Layer 2 Technologies
2.1 Configure and verify PPP
2.1.a Authentication (PAP, CHAP)
2.1.b PPPoE (client side only)
2.2 Explain Frame Relay
2.2.a Operations
2.2.b Point-to-point
2.2.c Multipoint
40% 3.0 Layer 3 Technologies
3.1 Identify, configure, and verify IPv4 addressing and subnetting
3.1.a Address types (Unicast, broadcast, multicast, and VLSM)
3.1.b ARP
3.1.c DHCP relay and server
3.1.d DHCP protocol operations
3.2 Identify IPv6 addressing and subnetting
3.2.a Unicast
3.2.b EUI-64
3.2.c ND, RS/RA
3.2.d Autoconfig (SLAAC)
3.2.e DHCP relay and server
3.2.f DHCP protocol operations
3.3 Configure and verify static routing
3.4 Configure and verify default routing
3.5 Evaluate routing protocol types
3.5.a Distance vector
3.5.b Link state
3.5.c Path vector
3.6 Describe administrative distance
3.7 Troubleshoot passive interfaces
3.8 Configure and verify VRF lite
3.9 Configure and verify filtering with any protocol
3.10 Configure and verify redistribution between any routing protocols or routing sources
3.11 Configure and verify manual and autosummarization with any routing protocol
3.12 Configure and verify policy-based routing
3.13 Identify suboptimal routing
3.14 Explain ROUTE maps
3.15 Configure and verify loop prevention mechanisms
3.15.a Route tagging and filtering
3.15.b Split-horizon
3.15.c Route poisoning
3.16 Configure and verify RIPv2
3.17 Describe RIPng
3.18 Describe EIGRP packet types
3.19 Configure and verify EIGRP neighbor relationship and authentication
3.20 Configure and verify EIGRP stubs
3.21 Configure and verify EIGRP load balancing
3.21.a Equal cost
3.21.b Unequal cost
3.22 Describe and optimize EIGRP metrics
3.23 Configure and verify EIGRP for IPv6
3.24 Describe OSPF packet types
3.25 Configure and verify OSPF neighbor relationship and authentication
3.26 Configure and verify network types, area types, and router types
3.26.a Point-to-point, multipoint, broadcast, nonbroadcast
3.26.b LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub
3.26.c Internal router, backbone router, ABR, ASBR
3.26.d Virtual link
3.27 Configure and verify OSPF path preference
3.28 Configure and verify OSPF operations
3.29 Configure and verify OSPF for IPv6
3.30 Describe, configure, and verify BGP peer relationships and authentication
3.30.a Peer group
3.30.b Active, passive
3.30.c States and timers
3.31 Configure and verify eBGP (IPv4 and IPv6 address families)
3.31.a eBGP
3.31.b 4-byte AS number
3.31.c Private AS
3.32 Explain BGP attributes and best-path selection
10% 4.0 VPN Technologies
4.1 Configure and verify GRE
4.2 Describe DMVPN (single hub)
4.3 Describe Easy Virtual Networking (EVN)
10% 5.0 Infrastructure Security
5.1 Describe IOS AAA using local database
5.2 Describe device security using IOS AAA with TACACS+ and RADIUS
5.2.a AAA with TACACS+ and RADIUS
5.2.b Local privilege authorization fallback
5.3 Configure and verify device access control
5.3.a Lines (VTY, AUX, console)
5.3.b Management plane protection
5.3.c Password encryption
5.4 Configure and verify router security features
5.4.a IPv4 access control lists (standard, extended, time-based)
5.4.b IPv6 traffic filter
5.4.c Unicast reverse path forwarding
10% 6.0 Infrastructure Services
6.1 Configure and verify device management
6.1.a Console and VTY
6.1.b Telnet, HTTP, HTTPS, SSH, SCP
6.1.c (T)FTP
6.2 Configure and verify SNMP
6.2.a v2
6.2.b v3
6.3 Configure and verify logging
6.3.a Local logging, syslog, debugs, conditional debugs
6.3.b Timestamps
6.4 Configure and verify Network Time Protocol (NTP)
6.4.a NTP master, client, version 3, version 4
6.4.b NTP authentication
6.5 Configure and verify IPv4 and IPv6 DHCP
6.5.a DHCP client, IOS DHCP server, DHCP relay
6.5.b DHCP options (describe)
6.6 Configure and verify IPv4 Network Address Translation (NAT)
6.6.a Static NAT, dynamic NAT, PAT
6.7 Describe IPv6 NAT
6.7.a NAT64
6.7.b NPTv6
6.8 Describe SLA architecture
6.9 Configure and verify IP SLA
6.9.a ICMP
6.10 Configure and verify tracking objects
6.10.a Tracking objects
6.10.b Tracking different entities (for example, interfaces, IPSLA results)
6.11 Configure and verify Cisco NetFlow
6.11.a NetFlow v5, v9
6.11.b Local retrieval
6.11.c Export (configuration only)
相關文章
-
思科認證實施Cisco IP路由考試概述
實施Cisco IP 路由(ROUTE 300-101)是獲得思科CCNP和CCDP認證需要通過的一項考試。考試時間爲120分鐘,包括50-60道考題。ROUTE 300-101考試證明通過的考生具備網絡路由的知識和相關技能。他們有能力使用先進的IP尋址技 -
實施Cisco IP交換網絡考試要點
(一)本人思想道德修爲好,尊敬他人有禮貌,勤奮不怕辛苦願意出差,有責任心,有耐心,性格開朗熱情,團隊意識、適應能力與自制力強,在學習上,我喜歡自己的專業,成績優良,曾擔任愛心社人事部,愛心社基金會委員,工作兢兢業業,誠信待人,生活上 -
Cisco路由器如何配置實現VoIP
其實利用Cisco路由器配置可以輕鬆的實現VoIP,下面小編準備了關於Cisco路由器如何配置實現VoIP的文章,提供給大家參考!VoIP(Voice over IP)是一種通過互聯網傳遞語音的技術,是隨着互聯網技術的發展而成長起來的。它很好地 -
思科認證實施Cisco IP交換網絡考試
實施Cisco IP交換網絡(SWITCH 300-115) 獲得思科CCNP和CCDP認證需要通過的一項考試。考試時間爲120分鐘,包括45-55道考題。SWITCH 300-115考試證明通過的考生具備網絡交換的`知識和技能。他們有能力使用思科企業架構來 -
cisco路由器voip配置解析2016
cisco路由器voip怎麼配置?在企業中路由器voip怎麼配置?下面跟yjbys小編一起來看看路由器voip配置過程及基本命令吧!在企業網絡中推廣IP語音技術有很多優點,例如可以控制數據流量,保證語音質量,充分利用企業租用的數據線 -
試談cisco路由器口令和IOS恢復
針對最常見的cisco路由器設備的IOS系統,小編下面給大家講解一下路由器口令和IOS恢復的步驟和方法。 一、 先說說路由器口令恢復的方法前提:口令恢復需要使用Console線將路由器和PC連接。恢復步驟:1.在路由器加電60S內 -
CISCO路由器CHAP認證配置
在配置PPP驗證時有PAP和CHAP的選擇,其中PAP爲明文傳送用戶名和口令,不安全。而CHAP則採用哈希值進行驗證,口令不會在網上傳送,所以安全性比較高。CHAP認證也是CCNA課程PPP教學時所需掌握的基本配置,其配置如下:拓撲: RA DTE- -
cisco路由器ppp認證方式
一、實驗拓撲 二、實驗要求:1、要求配置ppp協議2、分別用pap、chap認證3、配置總部的路由器給分部的路由器分配ip地址,並且從地址池中分配,4、pc1最終能ping銅pc2 三、實驗步驟:1、配置各路由器接口的ip地址 如 -
Cisco路由器裏SNMP的配置方法
可能有很多人還不瞭解Cisco路由器裏SNMP是如何配置的,以下就是小編分享Cisco路由器裏SNMP的配置方法,希望對大家有幫助! 1.問題描述:怎麼配置cisco路由器裏的Cisco路由器裏SNMP?哪位大俠知道?最好是有現成的例子,我的 -
CCIE路由和交換實驗考試要點
你正在瀏覽的自 薦 信是美術師範學生的自薦信例文 尊敬的校領導:您好!我叫xxx,是江蘇省徐州師範大學美術師範專業的應屆畢業生。值此擇業之際,我懷着一顆赤誠的心和對對教育工作的執著追求,擬此 自薦信 ,下面是我簡單的 自