思科认证实施Cisco IP路由考试概述
实施Cisco IP 路由(ROUTE 300-101)是获得思科CCNP和CCDP认证需要通过的一项考试。考试时间为120分钟,包括50-60道考题。ROUTE 300-101考试证明通过的考生具备网络路由的知识和相关技能。他们有能力使用先进的IP寻址技术和路由技术实施可扩展的`、高安全性的思科路由与局域网,广域网及IPv6的连接。 本考试还涵盖了为支持企业分支办公网络和移动网络工作环境配置高安全性路由解决方案。
以下是实施Cisco IP 路由(ROUTE 300-101)考试的主要内容和考点。然而,在考试的特定版本中也可能出现其他相关的考点。为了更好地反映考试内容并明确考试目的,下面的考试大纲可能在不发出通知的情况下随时调整。
10% 1.0 Network Principles
1.1 Identify Cisco Express Forwarding concepts
1.1.a FIB
1.1.b Adjacency table
1.2 Explain general network challenges
1.2.a Unicast
1.2.b Out-of-order packets
1.2.c Asymmetric routing
1.3 Describe IP operations
1.3.a ICMP Unreachable and Redirects
1.3.b IPv4 and IPv6 fragmentation
1.3.c TTL
1.4 Explain TCP operations
1.4.a IPv4 and IPv6 (P)MTU
1.4.b MSS
1.4.c Latency
1.4.d Windowing
1.4.e Bandwidth-delay product
1.4.f Global synchronization
1.5 Describe UDP operations
1.5.a Starvation
1.5.b Latency
1.6 Recognize proposed changes to the network
1.6.a Changes to routing protocol parameters
1.6.b Migrate parts of the network to IPv6
1.6.c Routing protocol migration
10% 2.0 Layer 2 Technologies
2.1 Configure and verify PPP
2.1.a Authentication (PAP, CHAP)
2.1.b PPPoE (client side only)
2.2 Explain Frame Relay
2.2.a Operations
2.2.b Point-to-point
2.2.c Multipoint
40% 3.0 Layer 3 Technologies
3.1 Identify, configure, and verify IPv4 addressing and subnetting
3.1.a Address types (Unicast, broadcast, multicast, and VLSM)
3.1.b ARP
3.1.c DHCP relay and server
3.1.d DHCP protocol operations
3.2 Identify IPv6 addressing and subnetting
3.2.a Unicast
3.2.b EUI-64
3.2.c ND, RS/RA
3.2.d Autoconfig (SLAAC)
3.2.e DHCP relay and server
3.2.f DHCP protocol operations
3.3 Configure and verify static routing
3.4 Configure and verify default routing
3.5 Evaluate routing protocol types
3.5.a Distance vector
3.5.b Link state
3.5.c Path vector
3.6 Describe administrative distance
3.7 Troubleshoot passive interfaces
3.8 Configure and verify VRF lite
3.9 Configure and verify filtering with any protocol
3.10 Configure and verify redistribution between any routing protocols or routing sources
3.11 Configure and verify manual and autosummarization with any routing protocol
3.12 Configure and verify policy-based routing
3.13 Identify suboptimal routing
3.14 Explain ROUTE maps
3.15 Configure and verify loop prevention mechanisms
3.15.a Route tagging and filtering
3.15.b Split-horizon
3.15.c Route poisoning
3.16 Configure and verify RIPv2
3.17 Describe RIPng
3.18 Describe EIGRP packet types
3.19 Configure and verify EIGRP neighbor relationship and authentication
3.20 Configure and verify EIGRP stubs
3.21 Configure and verify EIGRP load balancing
3.21.a Equal cost
3.21.b Unequal cost
3.22 Describe and optimize EIGRP metrics
3.23 Configure and verify EIGRP for IPv6
3.24 Describe OSPF packet types
3.25 Configure and verify OSPF neighbor relationship and authentication
3.26 Configure and verify network types, area types, and router types
3.26.a Point-to-point, multipoint, broadcast, nonbroadcast
3.26.b LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub
3.26.c Internal router, backbone router, ABR, ASBR
3.26.d Virtual link
3.27 Configure and verify OSPF path preference
3.28 Configure and verify OSPF operations
3.29 Configure and verify OSPF for IPv6
3.30 Describe, configure, and verify BGP peer relationships and authentication
3.30.a Peer group
3.30.b Active, passive
3.30.c States and timers
3.31 Configure and verify eBGP (IPv4 and IPv6 address families)
3.31.a eBGP
3.31.b 4-byte AS number
3.31.c Private AS
3.32 Explain BGP attributes and best-path selection
10% 4.0 VPN Technologies
4.1 Configure and verify GRE
4.2 Describe DMVPN (single hub)
4.3 Describe Easy Virtual Networking (EVN)
10% 5.0 Infrastructure Security
5.1 Describe IOS AAA using local database
5.2 Describe device security using IOS AAA with TACACS+ and RADIUS
5.2.a AAA with TACACS+ and RADIUS
5.2.b Local privilege authorization fallback
5.3 Configure and verify device access control
5.3.a Lines (VTY, AUX, console)
5.3.b Management plane protection
5.3.c Password encryption
5.4 Configure and verify router security features
5.4.a IPv4 access control lists (standard, extended, time-based)
5.4.b IPv6 traffic filter
5.4.c Unicast reverse path forwarding
10% 6.0 Infrastructure Services
6.1 Configure and verify device management
6.1.a Console and VTY
6.1.b Telnet, HTTP, HTTPS, SSH, SCP
6.1.c (T)FTP
6.2 Configure and verify SNMP
6.2.a v2
6.2.b v3
6.3 Configure and verify logging
6.3.a Local logging, syslog, debugs, conditional debugs
6.3.b Timestamps
6.4 Configure and verify Network Time Protocol (NTP)
6.4.a NTP master, client, version 3, version 4
6.4.b NTP authentication
6.5 Configure and verify IPv4 and IPv6 DHCP
6.5.a DHCP client, IOS DHCP server, DHCP relay
6.5.b DHCP options (describe)
6.6 Configure and verify IPv4 Network Address Translation (NAT)
6.6.a Static NAT, dynamic NAT, PAT
6.7 Describe IPv6 NAT
6.7.a NAT64
6.7.b NPTv6
6.8 Describe SLA architecture
6.9 Configure and verify IP SLA
6.9.a ICMP
6.10 Configure and verify tracking objects
6.10.a Tracking objects
6.10.b Tracking different entities (for example, interfaces, IPSLA results)
6.11 Configure and verify Cisco NetFlow
6.11.a NetFlow v5, v9
6.11.b Local retrieval
6.11.c Export (configuration only)
相關文章
-
思科认证实施Cisco IP交换网络考试
实施Cisco IP交换网络(SWITCH 300-115) 获得思科CCNP和CCDP认证需要通过的一项考试。考试时间为120分钟,包括45-55道考题。SWITCH 300-115考试证明通过的考生具备网络交换的`知识和技能。他们有能力使用思科企业架构来 -
实施Cisco IP路由考试要点
实施Cisco IP 路由(ROUTE 300-101)是获得思科CCNP和CCDP认证需要通过的一项考试。下面小编准备了该科考试的要点,提供给大家参考! 考试说明:考试时间为120分钟,包括50-60道考题。ROUTE 300-101考试证明通过的考生具备 -
CISCO路由器CHAP认证配置
在配置PPP验证时有PAP和CHAP的选择,其中PAP为明文传送用户名和口令,不安全。而CHAP则采用哈希值进行验证,口令不会在网上传送,所以安全性比较高。CHAP认证也是CCNA课程PPP教学时所需掌握的基本配置,其配置如下:拓扑: RA DTE- -
cisco路由器ppp认证方式
一、实验拓扑 二、实验要求:1、要求配置ppp协议2、分别用pap、chap认证3、配置总部的路由器给分部的路由器分配ip地址,并且从地址池中分配,4、pc1最终能ping铜pc2 三、实验步骤:1、配置各路由器接口的ip地址 如 -
思科认证辅导:cisco路由器忘记密码恢复
路由器忘记密码是很常见也是很麻烦的事情,这个时候就需要我们恢复下密码。恢复密码的主要步骤是:1.中断路由器启动 ctrl+break键2.更改配置寄存器的值为0x21423.重启路由器4.查看保存的配置文件中enable密码5.重设enabl -
思科认证CCIE路由和交换实验考试大纲
Exam Description: The CCIE® Routing and Switching Lab Exam version 5.0 is an eight-hour, hands-on exam which requires you to configure and troubleshoot a series of complex networks to given specif -
2016年思科认证辅导:cisco路由器忘记密码恢复
路由器忘记密码是很常见也是很麻烦的事情,这个时候就需要我们恢复下密码。那么思科路由器密码怎么恢复呢?下面yjbys小编为大家推荐恢复密码的主要步骤是:1.中断路由器启动 ctrl+break键2.更改配置寄存器的值为0x21423. -
Cisco路由器如何配置实现VoIP
其实利用Cisco路由器配置可以轻松的实现VoIP,下面小编准备了关于Cisco路由器如何配置实现VoIP的文章,提供给大家参考!VoIP(Voice over IP)是一种通过互联网传递语音的技术,是随着互联网技术的发展而成长起来的。它很好地 -
实施Cisco IP交换网络考试要点
🌷🌷🌷主要材料:印度丝装饰珠底布所需工具:剪刀圆头针制作步骤:第1步:第2步:第3步:第4步:第5步:第6步:第7步:第8步:第9步:第10步:第11步:第12步:第13步:第14步:第15步:第16步:第17步:第18步:第19步:第20步:第21步:第22步:第23步:第24步:第25步:第2 -
思科认证CCIE路由和交换笔试大纲
The CCIE written exam is a two-hour qualification exam. The exam uses a combination of 90-110 multiple choice questions and simulations to assess skills. Exams are closed book and no reference materia