H3C交換機如何設置TELNET登陸?下面YJBYS小編爲大家整理了關於h3c交換機配置telnet配置教程,希望對你有所幫助。
配置實例一:
通過Console口連接
配置交換機Vlan1的IP地址
system-view
[h3c]interface vlan-interface 1
[h3c-vlan-interface1]ip address
創建本地用戶Admin,並且進入本地視圖
[h3c]local-user admin
配置用戶的認證口令,明文|密文顯示方式,口令爲12345678
[h3c-luser-admin]password simple | cipher 12345678
配置用戶的.服務類型爲Telnet且命令級別爲2
[h3c-luser-admin]service-type telnet level 2
[h3c-luser-admin]quit
進入VTY0用戶界面視圖
[h3c]user-interface vty 0
配置通過VTY0用戶界面登錄交換機的Telnet用戶進行Scheme認證
[h3c-ui-vty0]authentication-mode scheme
配置VTY0用戶界面支持Telnet協議
[h3c-ui-vty0]protocol inbound telnet
配置VTY0用戶界面終端顯示屏的一屏顯示30行命令
h3c交換機配置telnet實例教程H3C認證
[h3c-ui-vty0]screen-length 30
配置VTY0用戶界面的歷史命令緩衝區可存放20條命令
[h3c-ui-vty0]history-command max-size 20
配置VTY0用戶界面的超過時間爲6分鐘
WiseMedia
[h3c-ui-vty0]idle-timeout 6
保存修改
[h3c]save
保存後就可以通過Telnet 連接了。
配置實例二:
進入console0口:
[H3C]user-interface aux 0(S)
修改驗證模式:
[H3C-ui-aux0]authentication-mode password
設置aux0 口密碼:
[H3C-ui-console0]set authentication password cipher | simple wisdom
進入VLAN1接口視圖:
[H3C]interface Vlan-interface 1
爲該接口設置IP:
[H3C-Vlan-interface1]ip address
[H3C-Vlan-interface1]ip address 24
進入vty 0 4接口:
[H3C]user-interface vty 0 4
設置密碼模式:
h3c交換機配置telnet實例教程h3c交換機配置telnet實例教程
[H3C-ui-vty0-4]authentication-mode password
設置密碼:
[H3C-ui-vty0-4]set authentication password cipher|simple wisdom
設置登錄級別:
[H3C-ui-vty0-4]user privilege level 3